Electronics diagonal cutter ESD with lead catcher, round head, 115 mm - Knipex 77 12 115 ESD

In ESD production neither charges nor flying offcuts may reach the assembly. The 77 12 115 ESD electronics diagonal cutter combines dissipative handles to DIN EN 61 340-5 with a lead catcher in the round head and cuts soft wire from 0.3 to 1.6 mm dia. at an edge hardness of approx. 62 HRC.

Benefits

• Electrically dissipative handles to DIN EN 61 340-5, suitable for ESD protected work areas.
• Durable, load-optimised design with a through-pinned, backlash-free box joint that gives a more direct feel when working.
• Slim sleeves drawn up towards the head allow fine and comfortable gripping between thumb and index finger.
• Less physical effort thanks to the high transmission ratio, plus a low-friction double spring for smooth and even opening.
• Round head with a small bevel and a lead catcher that holds the offcut, no uncontrolled loss of cut wire ends.
• Mirror polished head with a fine oil film protects against rust. No chrome flakes come loose that could cause faults in the circuit.

Technical data

Areas of use

Electronics production and service at ESD protected workstations, precision mechanics, laboratory work and prototyping. The dissipative handles allow work on assemblies that are sensitive to electrostatic discharge.

Standards and conformity

The pliers comply with DIN ISO 9654 and DIN EN 61 340-5. According to the manufacturer they contain no substances of very high concern under REACH. The RoHS directive does not apply to this product.