Electronics diagonal cutter ESD pointed and flat head with small bevel, 115 mm - Knipex 77 52 115 ESD

Inside an EPA even stiffer wire has to be cut cleanly without putting the assembly at electrostatic risk. The 77 52 115 ESD electronics diagonal cutter has a pointed, flat ground head with a small bevel and laser hardened edges of approx. 62 HRC. It cuts soft wire from 0.3 to 1 mm dia. and hard wire up to 0.5 mm dia.

Benefits

• ESD compliant to DIN EN 61 340-5 and therefore suitable for handling electrostatic sensitive devices.
• The small bevel on the pointed, flat ground edge supports the cutting edge and allows hard wire up to 0.5 mm dia.
• Durable, load-optimised design with a backlash-free box joint that gives a more direct feel when working.
• Narrow head of only 11 mm width reaches densely populated component areas, jaw length is 14 mm.
• Slim sleeves drawn up towards the head allow fine and comfortable gripping between thumb and index finger.
• Mirror polish with a fine oil film protects against rust. No chrome flakes come loose that could cause circuit faults.

Areas of use

Board assembly and repair, precision mechanics, laboratory work and prototyping inside EPA zones. The flat ground head with a small bevel suits jobs where medium hard and hard wire occur next to soft strands.

Standards and conformity

The cutter complies with DIN ISO 9654 and DIN EN 61 340-5. According to the manufacturer it contains no substances of very high concern under REACH. The RoHS directive does not apply to this product.