Electronics diagonal cutter pointed mini head with small bevel, 115 mm - Knipex 77 72 115

The denser an assembly is populated, the less room is left for the head of the pliers. That is why the 77 72 115 electronics diagonal cutter has a pointed mini head with a jaw length of only 10.5 mm and a jaw thickness of 6 mm at the joint. Its laser hardened edges of approx. 62 HRC cut soft wire from 0.3 to 0.8 mm dia.

Benefits

• Pointed mini head with a small bevel, jaw length 10.5 mm, reaches between closely spaced components.
• Slim jaws of only 6 mm thickness at the joint keep the view on the cutting point clear.
• Durable, load-optimised design with a backlash-free box joint that gives a more direct feel when working.
• Slim sleeves drawn up towards the head allow fine and comfortable gripping between thumb and index finger.
• Less physical effort thanks to the high transmission ratio, plus a low-friction double spring for smooth and even opening.
• Mirror polish with a fine oil film protects against rust. No chrome flakes come loose that could cause circuit faults.

Areas of use

Very fine cutting work on boards, in precision mechanics, laboratories and prototyping. The mini head is the choice when access between components and housing walls is especially tight and only soft wire has to be cut.

Standards and conformity

The cutter complies with DIN ISO 9654. According to the manufacturer it contains no substances of very high concern under REACH. The RoHS directive does not apply to this product.