Dry storage cabinet Ghibli ADV 350 l, 1 door - Iteco 8106810

MSD parts taken from dry pack absorb moisture. At reflow that moisture can stress the package and scrap the lot. Ghibli ADV 350 l holds the interior below 5 percent RH, typically 2 percent, so floor life per IPC/JEDEC J-STD-033 stays frozen.

What sets the cabinet apart

• Plug and play below 5 percent RH: switch on. TekDry modules run continuously and are not gated by a hygrometer, so a drifting sensor cannot stop drying.
• Modular for 20-plus years: dehumidifier modules come out with a screwdriver. Keep the steel body, swap the module.
• Ethernet and LED as standard: live humidity and temperature on the network, proximity-switched interior light, display in the cabinet top. Sensor 8104.853 mounts magnetically and can be sent for calibration without stopping the cabinet.
• ESD steel body: 1.2 mm steel, dissipative paint 10³ to 10⁹ ohm, magnetically sealed doors with key lock, flat front.

Typical use

Hold opened MSD reels and panels before soldering, EPA stores that need logged climate, rework and small series where opened dry pack must continue without a full bake.

Compatibility and scope of supply

Ships with 1 TekDry module, 2 m earth lead, mains cable, ADV sensor 8104.853, Ethernet port and LED interior light. Options: castors Iteco 8106.850, extra shelf 8106.840, tray rack 8106.866, Fast Recovery 8106.820, Alarm Box 8104.856, Tekmatrix 8105.113U/E.

Origin

Made by Iteco Trading in Italy.