Crimping die set for non-insulated cable lugs and connectors 0.5 to 10 mm², 4 dies - Knipex 97 49 14

Non-insulated cable lugs and connectors call for a profile that deforms the connector all round while following the dimensions of the standards. The 97 49 14 crimping die set covers the range from 0.5 to 10 mm² with four dies and is fitted into the KNIPEX crimp system pliers of the 97 43 xx series.

Benefits

• Four dies from 0.5 to 10 mm², corresponding to AWG 20 to 8, so no die change is needed within this range.
• For non-insulated crimp terminals, tube and compression cable lugs in accordance with DIN 46234 and DIN 46235.
• Equally for non-insulated crimp, butt and compression connectors in accordance with DIN 46341 and DIN 46267.
• Exchangeable die set for the KNIPEX crimp system pliers 97 43 xx, the pliers stay in use and only the profile changes.
• Compact at 50 x 17 mm and 37 g, easy to keep as a spare in the case of the system pliers.

Areas of use

Control cabinet and switchgear assembly, machine and plant wiring and repair work, wherever non-insulated cable lugs and connectors are fitted to conductors from 0.5 to 10 mm².

Standards and conformity

The dies follow the shapes defined in DIN 46234 and DIN 46235 for cable lugs and in DIN 46341 and DIN 46267 for connectors. According to the manufacturer the die set contains no substances of very high concern under the REACH regulation, the RoHS directive does not apply.