Crimping die for non-insulated open plug connectors 2.8 and 4.8 mm, 0.1 to 2.5 mm2 - Knipex 97 49 04

Anyone working with open plug type connectors needs the right profile for every plug width and cross-section. The 97 49 04 crimping die carries four crimping nests and so covers 0.1 to 2.5 mm2 for both 2.8 mm and 4.8 mm plug widths in a single interchangeable part.

Benefits

• Four crimping nests in one die, nest 1 for 0.1 to 0.25 mm2 at 2.8 mm plug width, nest 2 for 0.5 to 1.0 mm2 at 2.8 mm.
• Nest 3 for 0.5 to 1.0 mm2 at 4.8 mm plug width, nest 4 for 1.5 to 2.5 mm2 at 4.8 mm.
• Total working range 0.1 to 2.5 mm2, matching AWG 26 to 14.
• Interchangeable part for the manual and electromechanical KNIPEX crimp system pliers of the 97 43 series, one tool body covers many contact types with several dies.
• The additionally available locator 97 49 94 makes it easier to guide the contact during the crimping process.
• At 42 g and 50 x 10 mm the die is easy to keep in the tool case.

Areas of use

Cable assembly, vehicle and machine wiring, control cabinet building and repair work on connector strips with open plug connectors. According to the manufacturer the die is not suitable for special contact series such as Tyco Electronics, Molex or JST.

Standards and conformity

The manufacturer does not state a tool standard for this product. According to the manufacturer the crimping die contains no substances of very high concern under REACH, the RoHS directive does not apply.