Electric screwdriver 230 V push start 0.4 - 3.0 Nm, 1200 rpm, bit grounding - Delvo DLV30A12P-ABK

With small screws in large numbers, most of the time is lost while the screw runs in. At 1200 rpm the screw is seated sooner, and the shut-off clutch still ends the run cleanly between 0.4 and 3.0 Nm.

Benefits

• 1200 rpm with the same torque range, which nearly halves the run-in time compared with the 650 rpm version.
• Direct connection to 230 V AC, no control unit or power supply is needed at the bench.
• Two torque springs cover the range, the soft one from 0.4 to 1.6 Nm is supplied with the tool and the hard one from 1.2 to 3.0 Nm is fitted.
• Torque is set steplessly on the adjustment ring, and the cover over it keeps the set value from being changed by accident.
• Bit grounding is fitted as standard, so charge is led away through the tool instead of through the assembly. At ESD protected workstations nothing has to be retrofitted.
• Rated for cyclic work with 0.5 s on and 3.5 s off, which matches the rhythm of a manual assembly station. 3 m cord, 700 g at around 45 W, brushless motor with shut-off clutch and a design that conforms to the RoHS Directive.

Applications

Series joints in electronics and device manufacturing, housing assembly and small part production with a high piece count per shift.

Matching accessories

Bits with a 4 mm shank are taken by the ADA-HR4-D63 adapter. The BAL-0515 and BAL-1020 tool balancers carry the tool weight, and the SGR-14 and SGR-23 screw grids keep the screws ready at the bench.