Additional plate 0.5 mm for Supercut/LN100 lead cutting machine - Iteco 360114

When loose radial components are trimmed, the height of the cutting plate decides how much lead is left under the component body. This additional plate of 0.5 mm is the finest step in the range and, according to the price list, the standard version. It is laid on the standard plate of the Supercut/LN100 and raises the base figure of 3.2 mm by 0.5 mm.

Features

• 0.5 mm thick, the smallest step in the range and the standard version according to the price list.
• Raises the cutting height by 0.5 mm above the 3.2 mm base figure.
• Fits the 68 x 54 mm cutting area of the Supercut/LN100 cutting machine, Iteco 7915042.
• Simply laid in place, the change takes seconds and needs no tools.
• Further thicknesses in the range: 1 mm, 1.5 mm, 2 mm.

Applications

The plate is fitted when an assembly calls for more remaining lead length than the standard build delivers, for example with components that must stand off the board, or when room for bending after soldering is required. For frequent product changes it is worth keeping several thicknesses in stock.

Compatibility and scope of supply

Supplied is one additional plate of 0.5 mm for the Supercut/LN100. Additional plates of the smaller Supercut/LN5 and Supercut/LN5L ranges, Iteco 340114 and Iteco 340214, do not fit this machine.

Origin

Manufactured by Iteco Trading in Italy.