Additional plate 2 mm for Supercut/LN100 lead cutting machine - Iteco 36011407

The longest remaining lead length offered for the Supercut/LN100 comes from this additional plate of 2 mm. It raises the cutting height from the 3.2 mm base by 2 mm and is the thickest of the four steps Iteco lists for this machine.

Features

• 2 mm thick, the heaviest of the four steps for the Supercut/LN100.
• Raises the cutting height by 2 mm above the 3.2 mm base and gives the longest available lead stub.
• Fits the 68 x 54 mm cutting area of the Supercut/LN100 cutting machine, Iteco 7915042.
• Simply laid in place, the change takes seconds and needs no tools.
• Further thicknesses in the range: 0.5 mm, 1 mm, 1.5 mm.

Technical data

Applications

The plate is fitted when an assembly calls for more remaining lead length than the standard build delivers, for example with components that must stand off the board, or when room for bending after soldering is required. For frequent product changes it is worth keeping several thicknesses in stock.

Compatibility and scope of supply

Supplied is one additional plate of 2 mm for the Supercut/LN100. Additional plates of the smaller Supercut/LN5 and Supercut/LN5L ranges, Iteco 340114 and Iteco 340214, do not fit this machine.

Origin

Manufactured by Iteco Trading in Italy.