Silencers

Pneumatic connection technology

Pneumatic silencers reduce exhaust noise at the vent ports of directional control valves, cylinders and pressure regulators. The Aventics Series SI1 silencer (type SILENCER SNAPCOIL) snaps onto the vent port without tools and attenuates the characteristic blowout noise at valve switching without significantly restricting the exhaust cross-section.

⚙ Snap-Coil mounting - tool-free installation on valve exhaust ports

✓ Series SI1 - genuine Aventics part, matched to Aventics valve and component ranges

↕ Low back pressure - noise attenuation without significant throttling of exhaust flow

📦 Compact design - minimal space requirement at the exhaust port, suitable for tight valve enclosures

The SI1 Snap-Coil silencer is designed for exhaust ports on Aventics valve series. Verify the correct port size (G thread or snap-fit receptacle) on the valve housing before installation. The silencer should be inspected regularly for blockage caused by oil mist or particulates, as a clogged silencer can impair valve switching cycles. Where compressed air is heavily contaminated or carries condensate, upstream filtration with an NL- or AS-series maintenance filter is recommended.

Typical applications: Directional control valves and valve islands in manufacturing equipment and test rigs, pressure-regulator exhaust ports in assembly automation, handling systems and gripper controls, and machine-guarding applications where noise reduction at the compressed-air exhaust is required.

We can't find products matching the selection.

What are Aventics pneumatic silencers and what industrial applications require them?

Aventics pneumatic silencers are specialized noise reduction components designed to minimize acoustic emissions from pneumatic exhaust ports in industrial automation systems. These devices significantly reduce noise levels generated during cylinder return strokes and valve switching operations while maintaining optimal airflow characteristics. Primary applications include automotive assembly lines, packaging machinery, material handling systems, and cleanroom environments where noise reduction below 80 dBA is mandatory for worker safety compliance. The Aventics SI1 series silencers are particularly effective in high-cycle applications where compressed air systems operate continuously throughout production shifts.

What are the key technical selection criteria for Aventics pneumatic silencers?

Selection of Aventics pneumatic silencers depends on operating pressure range typically between 2 to 10 bar, port connection size matching your pneumatic components, and required noise reduction level measured in decibels. The Aventics 8993800114 SILENCER SNAPCOIL from the SI1 series offers quick-connect installation with standard thread sizes from M5 to G1/2 depending on application requirements. Flow capacity rated in liters per minute at standard conditions determines sizing, while media compatibility ensures proper function with compressed air containing up to 40 micrometers of particulate contamination. Temperature rating from -10°C to +80°C covers most industrial environments.

Which standards and certifications apply to Aventics pneumatic silencers?

Aventics pneumatic silencers comply with ISO 4414 standards for pneumatic fluid power systems and DIN EN ISO 13849 for safety-related parts of control systems. These components meet CE marking requirements under the Machinery Directive 2006/42/EC for industrial automation equipment. Sound level testing follows ISO 3744 measurement protocols to verify noise reduction performance claims. The silencers also conform to RoHS Directive 2011/65/EU for restricted hazardous substances in electronic equipment applications. ATEX certification may apply to specific variants designed for potentially explosive atmospheres in chemical processing or grain handling facilities.

What are the main differences between Aventics silencer product variants?

The primary distinction among Aventics silencer variants lies in connection methods, with the SNAPCOIL series like model 8993800114 featuring quick-connect couplings for rapid installation without threading tools. Standard threaded versions offer permanent mounting with NPT or metric threads from M5 to G3/8 sizes. Flow-through designs provide different noise attenuation levels ranging from 15 to 30 dBA reduction depending on internal baffle configuration. Compact variants suit space-constrained applications while high-flow models handle pneumatic systems requiring exhaust capacity above 500 liters per minute at 6 bar operating pressure.

What installation requirements and system compatibility considerations apply to Aventics silencers?

Aventics pneumatic silencers require direct mounting to exhaust ports of pneumatic cylinders, directional valves, or manifold blocks with matching thread specifications. The SNAPCOIL connection system allows tool-free installation by simply pushing the silencer onto compatible quick-connect fittings until the locking mechanism engages. System compatibility extends to all compressed air applications using filtered air with maximum 5 micrometers particle size and relative humidity below 80% at operating temperature. Minimum clearance of 25mm around the silencer housing ensures proper acoustic performance and prevents airflow restriction that could affect cylinder cycling speed.

What safety ratings and environmental specifications do Aventics silencers meet?

Aventics pneumatic silencers typically achieve IP54 protection rating against dust ingress and water splashing in industrial environments. Operating temperature range spans -10°C to +80°C for standard applications, with extended temperature variants available for extreme conditions. Maximum operating pressure reaches 10 bar with safety factor 4:1 according to ISO 4414 pressure vessel standards. The housing materials resist most industrial solvents and cleaning agents while maintaining structural integrity under vibration conditions up to 30g acceleration. Sound pressure level reduction of 20-25 dBA helps facilities achieve occupational noise exposure limits below 85 dBA as required by workplace safety regulations.

What maintenance schedule and service life expectations apply to Aventics pneumatic silencers?

Aventics pneumatic silencers require minimal maintenance with recommended inspection every 12 months or 500,000 operating cycles, whichever occurs first. Visual inspection should check for housing cracks, connection looseness, and internal filter element contamination that could restrict airflow. The sintered bronze or polyethylene filter elements typically last 2-3 years in standard industrial environments before replacement becomes necessary. Service life expectancy reaches 5-7 years under normal operating conditions with compressed air quality meeting ISO 8573-1 Class 7.4.4 specifications. Replacement indicators include reduced noise attenuation performance or visible exhaust air restriction during high-demand pneumatic operations.

Silencers

Technical features

Application notes

Typical applications