ESD precision electronics diagonal cutter, pointed head, small bevel, 125 mm - Knipex 79 32 125 ESD

On populated assemblies the component lead has to be cut close to the part without the pliers putting the component at electrostatic risk. The 79 32 125 ESD precision electronics diagonal cutter therefore combines a pointed head of only 11 mm width with dissipative handle sleeves and cutting edges of approx. 64 HRC.

Benefits

• Electrically dissipative handles designed to DIN EN 61 340-5 for workstations with an ESD protection concept.
• Very precisely ground, sharp cutting edges for exact cuts on sensitive electronic components, soft wire from 0.2 to 1.5 mm dia.
• Precision cutting edges additionally induction hardened, cutting edge hardness approx. 64 HRC, with a very small bevel for cuts close to the board.
• Pointed head with 11 mm head width and 11 mm jaw length reaches densely populated component areas.
• Bolted joint with particularly carefully machined joint surfaces for even, low-friction movement across the whole opening range, plus a smooth-running double spring.
• Approx. 20 percent lighter than conventional electronics pliers, here 61 g at 125 mm length.

Technical data

Areas of use

Board assembly and rework, precision mechanics, laboratory work and prototyping. The dissipative handle sleeves make the cutter suitable for EPA workstations.

Standards and conformity

The cutter complies with DIN ISO 9654 and DIN EN 61 340-5. According to the manufacturer it contains no substances of very high concern under REACH. The RoHS directive does not apply to this product.