Electric screwdriver lever start 0.3 - 1.2 Nm, 500 - 700 rpm, shut-off clutch - Delvo DLV7333-CKE

In device and electronics assembly the repeatability of the screwdriver decides the reject rate. This model holds the preset torque between 0.3 and 1.2 Nm and shuts off through its clutch as soon as the value is reached, so machine screws from 2.0 to 3.5 mm end up equally tight at every position.

Benefits

• Torque infinitely adjustable from 0.3 to 1.2 Nm, matched to machine screws from 2.0 to 3.5 mm.
• Shut-off clutch ends the run at the preset value and protects thread and screw head.
• Lever start releases the spindle only once the bit is seated in the recess.
• Speed of 500 to 700 rpm, tuned to the torque range.
• Tool weight of 350 g at around 35 W power consumption, easy on the hand over long cycles.
• 1/4 inch hexagon bit holder for common bits with a 6.35 mm shank.

Applications

Electronics manufacturing, device and sub-assembly work, precision mechanics and repair or test benches handling screws up to 3.5 mm.

Matching accessories

The screwdriver runs on the DLC1213A-GGB and DLC1213A-GG control units, which provide soft start and adjustable speed and connect to 230 V AC with a European plug. The ADA-HR4-D63 adapter takes bits with a 4 mm shank, the BAL-0515 and BAL-1020 tool balancers carry the weight at the bench, and the SGR-14 and SGR-23 screw grids keep the screws ready.