Iron Man Plus single workstation continuous monitor - Desco CTC331-WW

The Desco CTC331-WW Iron Man Plus continuously verifies the path-to-ground integrity of one operator and one conductive or dissipative worksurface. It also detects electrical overstress (EOS) and dangerous body voltages, so risks to sensitive assemblies are flagged early.

Key benefits

• Electrical overstress (EOS) detection: alarms if overvoltage of ±5 V or less from a tool such as a soldering iron or electric screwdriver is applied to a board under assembly
• Operator body voltage detection for voltages dangerous to ESD susceptible items
• Digital signal processing with a low 0.40 V test voltage
• Miniature size (approx. 22 x 61 x 66 mm) with mounting tabs, installs even underneath table tops
• Replaceable dual-wire operator jack via the CTA251 without soldering

Technical specifications

• Monitors: 1 operator and 1 worksurface
• Operator test voltage: 0.40 V
• EOS detection: ±5 V or less
• Wrist strap: dual-wire
• Dimensions: approx. 22 x 61 x 66 mm (H x W x L)
• Power adapter: 100 to 240 V AC with interchangeable plugs
• NIST calibrated with calibration certificate

Standards and compliance

Meets ANSI/ESD S20.20 in accordance with ESD TR1.0-01-01 and the requirements for continuous ground monitoring per IEC 61340-5-1. Assembled in the USA with globally sourced materials.