Cutting and bending machine for axial components Superform/AP, reinforced wheels, 3.9 mm curl - Iteco 7915102D

Taped axial components only insert cleanly when cut length, bend and curl come out the same on every part. The Superform/AP 7915.102D cuts, bends and curls in one pass and fixes the curl dimension Z at 3.9 mm so the component sits vertically on the board. The reinforced bending wheels handle lead diameters up to 1.4 mm, and the lead pitch P starts at 10.2 mm.

Benefits

• Reinforced bending wheels for lead diameters of 1 - 1.4 mm
• Curl dimension Z fixed at 3.9 mm, giving the same seating height across a production run
• Lead pitch P adjustable from 10.2 - 60 mm, component bodies up to 50 mm long and 16 mm in diameter
• Output of up to 20,000 components per hour, by hand or with the optional motor unit
• The two cutting and curling wheels can be exchanged for cutting-only wheels to obtain a U shape without curl
• Tracking wheels adjustable independently, which speeds up the setup for a new form

Technical data

Applications

• Preparing taped resistors, diodes and chokes for through-hole insertion
• Series production in which every component reaches the board at the same lead pitch
• Prototyping and small batches, where a bench machine is ready faster than an automated line
• Rework and reforming of remaining stock from the store

Compatibility and scope of supply

The machine 7915.102D is supplied for manual operation. The motor unit 7915.030 (230 V) or 7915.031 (115 V) for Superform/A-AP-S-V-R-RCP is supplied only assembled with the machine and works with the foot switch 600.023. Available accessories are the BR6 tape reel holder (7915.185) and the CS10 feeder (7915.180) for loose axial components. Made in Italy.