Lead cutting and bending machine Superform/V-LC 7.62 mm pitch 0.8-1.3 mm lead - Iteco 7915209C

At the top end of the programme sit parts with a heavy lead and a large body. The Superform/V-LC 7915.209C works leads of 0.8 to 1.3 mm at a fixed pitch of 7.62 mm and takes component dimensions up to 10 mm.

Operating features

• 7.62 mm pitch with leads up to 1.3 mm - the largest combination of spacing and lead size in the range.
• Component dimension up to 10 mm - for axial electrolytic capacitors, large chokes and power diodes.
• Bending dimension A from 6 to 9 mm - the adjustment range starts at the highest value of all versions.
• Fixed spacing - the pitch is set on the machine and does not have to be dialled in for every batch.
• Hand crank - no motorisation is provided, in return there is no need for air or mains power.

Technical data

Applications

Upright mounting of large axial parts such as electrolytic capacitors, power diodes and chokes with heavy leads, where the layout is drilled on the 0.3 inch grid.

Compatibility and scope of supply

The machine processes taped axial components. The BR6 tape reel holder (Iteco 7915.185) can be fitted and is not part of the delivery. The LC range is deliberately simple and cannot be motorised. For motor driven work or for feeding loose components, the larger Superform/V is the next step, which Iteco lists in the same configuration under part number 7915.091C. Supplied as one machine without further accessories. Made in Italy.