Cutting and bending machine Superform/A reduced bend length fixed pitch 7.62 mm - Iteco 7915100H

The Superform/A 7915.100H is the reduced bend length version with a permanently set pitch of 7.62 mm. It corresponds to version 7915.100G but works on the wider 7.62 mm grid used for larger component bodies and for boards with a 0.3 inch hole pattern.

Key features

• Fixed 7.62 mm pitch, no adjustment of the bending unit, every component leaves the machine with the same hole spacing.
• Reduced bend length with a C dimension from 0.5 mm according to the price list, so the bend sits close to the body.
• For taped axial components with thin leads, production rate up to 40,000 pcs per hour.
• Compact all-mechanical design that needs neither power nor compressed air in the hand-operated version.
• Takes the same accessories as every Superform machine, among them the BR6 tape reel holder.

Technical data

The Iteco catalogue 2026 tabulates the dimensions of the reduced bend length version under 7915.100G. According to the price list, 7915.100H differs from it only in the fixed 7.62 mm pitch.

Applications

Batch preparation of axial components for boards with a 7.62 mm hole pattern, kitting for small and medium series, and spare part or repair production where repeatable pitch matters more than free adjustment.

Accessories and scope of supply

The machine is supplied as a hand-operated unit without motor drive. Iteco offers the BR6 tape reel holder (7915.185) for unwinding the component tape, the CS10 feeder for loose axial components (7915.180) and the motor unit with manual speed adjustment and automatic torque control in 230 V (7915.030) and 115 V (7915.031). The 600.023 foot switch belongs to these motor units.

Origin

Superform is a machine range built by Iteco Trading, Italy. The machine works purely mechanically and in its hand-operated version needs neither a power nor a compressed air connection.