Superform/A cutting and bending machine with reduced bending length and quick setting - Iteco 7915100FR

Version FR of the Superform/A joins the small bending dimensions of the F tooling with the quick setting device for the pitch. Dimension C starts at 0.8 mm, the pitch runs from 5 to 40 mm and the lead may be 0.4 to 0.8 mm thick.

Features

• Dimension C from 0.8 to 10 mm - the small bending dimensions of version F are kept.
• Quick setting of the pitch - format change in one movement, without adjusting both drive wheels separately.
• Pitch 5 to 40 mm - the 2026 catalogue gives 40 mm as the maximum pitch with quick setting.
• Lead range 0.4 to 0.8 mm - aimed at thin lead components from tape.
• Up to 40,000 pieces per hour - hand crank as standard, motor unit as an accessory.

Applications

Small batches and sample building with tight hole grids and frequently changing boards, typically in development departments and repair shops. If a pitch above 40 mm is needed throughout, version 7915.100F without quick setting is the better fit.

Compatibility and scope of delivery

Iteco offers the BR6 tape reel holder (7915.185), the CS10 feeder for loose axial components (7915.180) and the motor unit in 230 V (7915.030) and 115 V (7915.031) with its foot switch (600.023) as accessories. The motor unit is supplied mounted on the machine only and provides stepless speed adjustment with automatic torque control. The machine itself is delivered as a hand operated unit with crank, accessories are not included. Made in Italy.