Superform/A cutting and bending machine with reinforced bending wheels and quick setting - Iteco 7915100DR

Version DR of the Superform/A combines the reinforced bending wheels for leads up to 1.4 mm with the quick setting device for the pitch. The pitch then runs from 10.2 to 40 mm while output stays at up to 40,000 pieces per hour.

Features

• Reinforced bending wheels - leads from 0.6 to 1.4 mm, suitable for power components.
• Quick setting - the pitch is changed in one movement instead of adjusting both drive wheels separately.
• Pitch 10.2 to 40 mm - the 2026 catalogue gives 40 mm as the maximum pitch with quick setting.
• Body length from 5 mm, dimension C from 2.4 mm - figures of the reinforced tooling.
• Up to 40,000 pieces per hour - hand crank as standard, motor unit as an accessory.

Applications

Production with heavy leads and frequent pitch changes, for example repair of power electronics or sample building. If a pitch above 40 mm is required, version 7915.100D without quick setting is the matching alternative.

Compatibility and scope of delivery

Iteco offers the BR6 tape reel holder (7915.185), the CS10 feeder for loose axial components (7915.180) and the motor unit in 230 V (7915.030) and 115 V (7915.031) with its foot switch (600.023) as accessories. The motor unit is supplied mounted on the machine only and provides stepless speed adjustment with automatic torque control. The machine itself is delivered as a hand operated unit with crank, accessories are not included. Made in Italy.