Additional plate 3 mm for longer lead cutting length for SUPERCUT/LN5 - Iteco 34011420

With a material thickness of 3 mm this additional plate uses the full extra thickness that Iteco permits on the SUPERCUT/LN5. The cutting height rises from 3.2 mm to 6.2 mm, the longest remaining lead length that can be set on this machine with a single plate.

Benefits

• 3 mm material thickness, the maximum stated by the manufacturer, thicker plates are not intended for the machine.
• Cutting height of 6.2 mm instead of 3.2 mm, so the greatest lead length that can be reached.
• Useful for components that have to stand well clear of the board, for thermal reasons or because of test clamps.
• Made for the 53 x 43 mm cutting area of the SUPERCUT/LN5, several components per stroke remain possible.
• One plate change replaces cutting to length by hand and keeps the lead length constant over the whole batch.

Applications

Assemblies with the largest clearance between component and board, power parts with a cooling air gap, test setups with attached clamps, and applications where the leads are shortened again at a later stage.

Compatibility and scope of delivery

The plate belongs to the SUPERCUT/LN5 cutting machine (Iteco 7915.041) and is fitted on its 3.2 mm stationary plate. For the SUPERCUT/LN5L model no plate of this thickness is listed in the 2026 price list. Scope of delivery: one additional plate of 3 mm, no further accessories. Made in Italy by Iteco.