Additional plate 2 mm for longer lead cutting length for SUPERCUT/LN5 - Iteco 34011418

This additional plate of 2 mm raises the cutting height of the SUPERCUT/LN5 from 3.2 mm to 5.2 mm. It is the right choice when lead reserve has to remain after cutting, for clinching, crimping or for thicker printed circuit boards.

Benefits

• 2 mm material thickness, two thirds of the 3 mm additional thickness permitted by the machine.
• Cutting height of 5.2 mm against 3.2 mm in standard condition, so 2 mm more lead per connection.
• Enough lead reserve to clinch the leads after insertion or to pass through a thicker board.
• Made for the 53 x 43 mm cutting area of the SUPERCUT/LN5, the burr free guillotine cut is retained.
• No machine conversion is needed, the pneumatic foot pedal actuation at 6 bar remains the same.

Technical data

Applications

Production with thicker or multilayer boards, leads that are bent over after insertion, and assemblies where a defined lead reserve is planned for later test or measuring points.

Compatibility and scope of delivery

The plate belongs to the SUPERCUT/LN5 cutting machine (Iteco 7915.041) and is fitted on its 3.2 mm stationary plate. For the SUPERCUT/LN5L model, order the plate of the same thickness, Iteco 34021403, instead. Scope of delivery: one additional plate of 2 mm, no further accessories. Made in Italy by Iteco.