Die assembly body locked on PCB with lock-in for Supercut/RP - Iteco 7915158C
-
This Item:
€1,510.78
-
Preforming and cutting die assembly lock-in with seated body for Supercut/RS4 - Iteco 160900
€941.05
-
Stand-off lock-in die with 3 leads in line TO220 for Supercut/TOCF - Iteco 132400
€1,979.52
With this lead form the component body butts directly against the board, no loop and no gap are formed underneath it. The part is locked only below the board, where the leads are splayed apart. The result is the lowest mounted height the Supercut/RP die blocks can produce.
Features
- The body rests flat on the board, which mechanically steadies tall or heavy radial components.
- Splaying the leads under the board keeps the part in its holes until soldering.
- Without a loop under the body the overall height of the populated board stays minimal, which matters in flat enclosures and tight stacking distances.
- Pneumatic die block with vertical travel, changed over without realigning the machine.
Technical data
| Feature | Value |
|---|---|
| Iteco part number | 7915.158C |
| Type | die block (cutting and forming tool) |
| Series | Supercut/RP |
| Lead form | body butted on the board, leads splayed and locked underneath |
| Body relative to the board | sits flat on the board, no gap |
| Component type | taped radial components |
| Tool travel | pneumatic, vertical from top to bottom |
| Change | quick and simple, no realignment of the machine |
| Fits | Supercut/RP 7915.154 and 7915.154A (12.7 mm tape pitch) as well as 7915.155 and 7915.155A (15 mm tape pitch) |
| Scope of supply | one die block, machine not included |
| Origin | Italy |
Applications
For low profile assemblies and for tall or heavy radial parts that must not stand off, because they would otherwise tilt or touch the enclosure. Common with large diameter electrolytic capacitors and wherever the overall board height is limited.
Compatibility and scope of supply
Fits the Supercut/RP in all four versions. One die block is supplied without a machine. If the component is meant to stand clear of the board instead, choose 7915.158A with the double loop or 7915.158B with the single support loop.
Origin
Manufactured by Iteco Trading in Italy.
| Manufacturer Nr. | 7915158C |
|---|---|
| Manufacturer | Iteco |
| Country of Manufacture | Italy |
| Weight | 1.000000 |
| Sales unit | Stück |
| GPSR manufacturer information | Iteco Trading S.r.l, Via Paisas 1, IT-10094 Giaveno (TO), www.iteco.it |
| Series | Supercut/RP |
